https://vintagelampparts.net Tue, 01 Sep 2026 21:40:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://vintagelampparts.net/pair-antique-cased-red-satin-glass-miniature-oil-lamp-drape-pattern-pa-burners/ https://vintagelampparts.net/pair-antique-cased-red-satin-glass-miniature-oil-lamp-drape-pattern-pa-burners/#comments Sun, 30 Aug 2026 21:35:03 +0000 https://vintagelampparts.net/pair-antique-cased-red-satin-glass-miniature-oil-lamp-drape-pattern-pa-burners/ Read More]]>

























Pair Antique Cased Red Satin Glass Miniature Oil Lamp Drape Pattern P&A BURNERS. PLEASE LOOK OVER ALL 24 PICTURES. EACH IS MISSING THE SMALL GLASS CHIMNEY, BUT ARE EASY TO GET. THE BASE OF 1 LAMP IS ABSOLUTELY FLAWLESS PRISTINE. WICK WHEELS ON BOTH TURN FREELY. THE OTHER HAS A SMALL SCRATCH SEE CLOSEUPS AS THE COUPLE OF TINY SPOTS ARE SHINY. ITS NOT CHIPPED ITS LITERALLY A SCRATCH OR A FACTORY FLAW. EITHER WAY IT CERTAINLY DOES NOT DETRACT FROM HOW NICE AND RAE THE ARE. THE SHADES ON BOTH HAVE TINY NICKS AROUND THE TOP AND BOTTOM ON BOTH SHADES. SEE ALL THE CLOSEUPS. NO CRACKS NO HAIRLINES JUST SMALL NICKS FROM 150 YEARS OF USE. THE SQUARE SPOT ON THE BOTTOM OF ONE BASE IS WHERE A LABEL OR STICKER WAS.

]]> https://vintagelampparts.net/pair-antique-cased-red-satin-glass-miniature-oil-lamp-drape-pattern-pa-burners/feed/ 0 https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-4/ https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-4/#comments Fri, 14 Aug 2026 20:46:56 +0000 https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-4/ Read More]]>














Beautiful vintage dimpled rose floral glass 9 7/8 Fitter Rim light lamp replacement shade/globe. The glass is in beautiful condition with very minimal usage ware, there is a few shale type chip flakes in the inner side of the fitter lip but these could just be moulded imperfections in the glass from the glass making process as well but mentioning for listing accuracy. NOTE- The type of bulb and wattage used will effect the color of the glass while lit, a brighter LED bulb was used for displaying the lit photo, if using softer lower watt incandescent lighting it will give a darker softer more subtle appearance, please keep in mind that bulbs greatly effect the color tone when lit. The bottom rim is meant for a 9 7/8″ globe receiver retaining base while the actual outer bulge of the shade is approximately 10 1/8″ overall. The height is approximately 7 1/2 Tall. There is a glass makers mark tail from where the glass was removed during its making process, (pictured), this is a natural imperfection. Thank you for looking!

]]> https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-4/feed/ 0 https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-3/ https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-3/#comments Tue, 26 May 2026 04:14:12 +0000 https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-3/ Read More]]>














Beautiful vintage dimpled rose floral glass 9 7/8 Fitter Rim light lamp replacement shade/globe. The glass is in beautiful condition with very minimal usage ware, there is a few shale type chip flakes in the inner side of the fitter lip but these could just be moulded imperfections in the glass from the glass making process as well but mentioning for listing accuracy. NOTE- The type of bulb and wattage used will effect the color of the glass while lit, a brighter LED bulb was used for displaying the lit photo, if using softer lower watt incandescent lighting it will give a darker softer more subtle appearance, please keep in mind that bulbs greatly effect the color tone when lit. The bottom rim is meant for a 9 7/8″ globe receiver retaining base while the actual outer bulge of the shade is approximately 10 1/8″ overall. The height is approximately 7 1/2 Tall. There is a glass makers mark tail from where the glass was removed during its making process, (pictured), this is a natural imperfection. Thank you for looking!

]]> https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-3/feed/ 0 https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-2/ https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-2/#comments Wed, 11 Mar 2026 07:36:45 +0000 https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-2/ Read More]]>














Beautiful vintage dimpled rose floral glass 9 7/8 Fitter Rim light lamp replacement shade/globe. The glass is in beautiful condition with very minimal usage ware, there is a few shale type chip flakes in the inner side of the fitter lip but these could just be moulded imperfections in the glass from the glass making process as well but mentioning for listing accuracy. NOTE- The type of bulb and wattage used will effect the color of the glass while lit, a brighter LED bulb was used for displaying the lit photo, if using softer lower watt incandescent lighting it will give a darker softer more subtle appearance, please keep in mind that bulbs greatly effect the color tone when lit. The bottom rim is meant for a 9 7/8″ globe receiver retaining base while the actual outer bulge of the shade is approximately 10 1/8″ overall. The height is approximately 7 1/2 Tall. There is a glass makers mark tail from where the glass was removed during its making process, (pictured), this is a natural imperfection. Thank you for looking!

]]> https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage-2/feed/ 0 https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage/ https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage/#comments Sat, 10 Jan 2026 18:05:50 +0000 https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage/ Read More]]>














Beautiful vintage dimpled rose floral glass 9 7/8 Fitter Rim light lamp replacement shade/globe. The glass is in beautiful condition with very minimal usage ware, there is a few shale type chip flakes in the inner side of the fitter lip but these could just be moulded imperfections in the glass from the glass making process as well but mentioning for listing accuracy. NOTE- The type of bulb and wattage used will effect the color of the glass while lit, a brighter LED bulb was used for displaying the lit photo, if using softer lower watt incandescent lighting it will give a darker softer more subtle appearance, please keep in mind that bulbs greatly effect the color tone when lit. The bottom rim is meant for a 9 7/8″ globe receiver retaining base while the actual outer bulge of the shade is approximately 10 1/8″ overall. The height is approximately 7 1/2 Tall. There is a glass makers mark tail from where the glass was removed during its making process, (pictured), this is a natural imperfection. Thank you for looking!

]]> https://vintagelampparts.net/9-78-fit-satin-frost-oil-kerosene-dimpled-rose-glass-lamp-shade-globe-vintage/feed/ 0 https://vintagelampparts.net/satin-ball-shade-with-g9-socket-captions-lamp-diy-howto/ https://vintagelampparts.net/satin-ball-shade-with-g9-socket-captions-lamp-diy-howto/#comments Sun, 14 Dec 2025 17:11:33 +0000 https://vintagelampparts.net/satin-ball-shade-with-g9-socket-captions-lamp-diy-howto/ ]]> https://vintagelampparts.net/satin-ball-shade-with-g9-socket-captions-lamp-diy-howto/feed/ 0 https://vintagelampparts.net/7-inch-fitter-satin-crystal-diamond-quilted-vintage-lamp-shade-crimped-design/ https://vintagelampparts.net/7-inch-fitter-satin-crystal-diamond-quilted-vintage-lamp-shade-crimped-design/#comments Fri, 11 Jul 2025 16:25:55 +0000 https://vintagelampparts.net/7-inch-fitter-satin-crystal-diamond-quilted-vintage-lamp-shade-crimped-design/ Read More]]>








7 Inch Fitter Satin Crystal Diamond Quilted Vintage Lamp Shade – Crimped Design. 7 Inch Fitter Satin Crystal Diamond Quilted Vintage Lamp Shade. Experience the timeless elegance of our exquisite vintage lamp shade, designed to illuminate any space with charm and sophistication. Fitter Size: 7 inches. Crimped Design: Stylishly crimped top for a vintage look. Material: Satin crystal glass that diffuses light beautifully. Craftsmanship: Each shade is meticulously hand-blown by skilled artisans. Style: Diamond Quilted Student Style that evokes nostalgia and warmth. Designer: Crafted by Supply, known for exceptional quality. Illuminate your living space with a blend of vintage charm and modern functionality. The satin crystal glass offers a warm, inviting glow that enhances any decor. Hand-blown craftsmanship ensures each piece is unique, providing a special touch to your interior. The diamond quilted design adds texture and elegance, making it a perfect focal point for any room. Durable and stylish, an ideal choice for both residential and commercial settings. Why Choose Our Vintage Lamp Shade? Add a distinctive touch of elegance to your home with our 7 Inch Fitter Satin Crystal Diamond Quilted Vintage Lamp Shade. Perfect for traditional and modern aesthetics alike, this shade not only enhances the beauty of your lighting fixtures but also creates an ambiance that is warm and inviting. Transform your space into a radiant retreat-order your vintage lamp shade today and bask in its timeless charm! Alternative Carriers – We may use alternative carriers e. To ensure your package arrives safely and on time. Your feedback is extremely important to us. We strive to provide the best products and customer service possible. We are committed to resolving any problems and ensuring your satisfaction. Item Diameter: 7 inches. Item Height: Not Set. Item Length: Not Set. Item Weight: 0.79 kilograms. Item Width: Not Set. Product Line: Not Set. Features: Frosted, Crimped Top, Hand Blown. Bulb Shape Code: Not Set. Lighting Technology: Not Set. Country/Region of Manufacture: Not Set. Year Manufactured: Not Set.

]]> https://vintagelampparts.net/7-inch-fitter-satin-crystal-diamond-quilted-vintage-lamp-shade-crimped-design/feed/ 0 https://vintagelampparts.net/nice-antique-satin-iridescent-2-shade-1920s-light-lamp-fixture-parts/ https://vintagelampparts.net/nice-antique-satin-iridescent-2-shade-1920s-light-lamp-fixture-parts/#comments Sat, 15 Feb 2025 07:13:46 +0000 https://vintagelampparts.net/nice-antique-satin-iridescent-2-shade-1920s-light-lamp-fixture-parts/










NICE ANTIQUE SATIN IRIDESCENT 2 SHADE 1920s LIGHT LAMP FIXTURE PARTS. Very nice fixture 8: wide and 25 tall, has been cleaned and rewired, good condition, original patina, outer shade has a chip on the bottom, see pics.

]]> https://vintagelampparts.net/nice-antique-satin-iridescent-2-shade-1920s-light-lamp-fixture-parts/feed/ 0 https://vintagelampparts.net/miniature-lamp-listing-7-of-7-plume-rare-red-satin-cased-glass-pa-1877-buner/ https://vintagelampparts.net/miniature-lamp-listing-7-of-7-plume-rare-red-satin-cased-glass-pa-1877-buner/#comments Thu, 19 Dec 2024 08:42:45 +0000 https://vintagelampparts.net/miniature-lamp-listing-7-of-7-plume-rare-red-satin-cased-glass-pa-1877-buner/ 7 is missing then I have no more...

Read More

]]>













I moved the main photo of multiple lamps to the last photo so it would be easier to see what each listing is offering. Listing # 7 of 7 separate listings. All the lamps in the first photo have been listed individually. If one of the listings 1>7 is missing then I have no more of that one to offer. Some of the lamps have a second matching lamp that was available at the time of the original listing. This lamp like all of the others is from my personal collection. It is pictured on page 107 figure 203 of the Smith miniature lamp book. It was originally only made in milk glass but was made again by at least 3 companies in multiple colors. The red cased glass lamp and the green cased glass lamp seem to be the two hardest colors to come by. Check in often to see any new listing of miniature and some larger oil lamps. I do accept offers on most anything listed even if that option is not showing. If you are interested feel free to message and if we agree on a price I will send an offer back to you for that amount. See and enlarge the pictures as they are a large part of the description. There are no chips cracks or repairs to any of the parts. It is a very nice example of this lamp. There are “no” rough edges on the shade top or fitter edges. The burner is a Plume and Atwood1877 burner. The shade holder fits well.. The current wick is old but in good usable condition. The lamp is 7 high to the top of the shade. The shade is 2 3/4″ high, approximately 4 3/4″ wide across at the widest point. The fitter is 4 inches wide. The base font is approximately 3 ” to the top of the collar, approximately 4 3/4″ wide. The base bottom is 3 wide. The Chimney is 3 3/4″ tall with a 1 1/8″ fitter. I do accept offers on anything listed and can send an offer if we agree on a price. Any questions feel free to message.

]]> https://vintagelampparts.net/miniature-lamp-listing-7-of-7-plume-rare-red-satin-cased-glass-pa-1877-buner/feed/ 0 https://vintagelampparts.net/antique-peg-satin-glass-lamp-parts-great-lot-for-restoration/ https://vintagelampparts.net/antique-peg-satin-glass-lamp-parts-great-lot-for-restoration/#comments Tue, 28 May 2024 05:16:55 +0000 https://vintagelampparts.net/antique-peg-satin-glass-lamp-parts-great-lot-for-restoration/ Read More]]>













THERE ARE FEW LAMP PARTS FOR ANTIQUE LAMP PEG LAMPS RESTORATION. SATIN GLASS PINK-WHITE CASED GLASS LAMP SHADE-mint condition, tall 4 6/8″ wide 6 1/8″ fitting 5.5. Old brass shade holder – fitting 5 5/8″ tall 2″, original design, no problem. YELLOW-WHITE COLOR LAMP FONT – was drilled has white yellow color, tall 2 5/8″ wide 3 3/8″. PINK-WHITE COLOR LAMP FONT -has original shape, but has small crack, tall 3 5/8″ wide 3 3/8″. Pleas look my very detail photos, they are part of description.

]]> https://vintagelampparts.net/antique-peg-satin-glass-lamp-parts-great-lot-for-restoration/feed/ 0